eGPU V1
June 11, 2022
I made this eGPU case after I switched to XPS13 in 2019. And wait until 2022 to post it. = = The design was based on AD_LINK R43SG PCIE extension PCB and AMD R9 nano. The power supply is a 200W dell power adaptor. The concept is to make the whole case as small as possible. This project is available at GrabCAD link.
HVP V2
NOVEMBER 20, 2020
This is the second generation of the hyper-velocity printer. Comparing with the last generation, the most significant changes are the 3-Z and tool-changer design. The printer is powered by a duet 2 wifi. And there's also a raspberry pi for webcam monitoring and an arduino serving as the tool-changer stepper motor driver.
HVP V1
OCTOBER 10, 2020
This is the first generation of the hyper-velocity printer. A lot of time was spent designing, manufacturing, and tuning the printer. Most of the parts were manufactured using the MPCNC. The printer was aimed to achieve a considerably high printing speed. However, the printer was eventually disassembled for the second generation because of the design flaw on the Z axis.
